Bernette B48 Funlock Combi

An affordable overlocker/Coverstitch machine with a wide range of features and impressive stitch quality

The Bernette 48 is the top model of the Funlock series and is a combination of an overlocker and a Coverstitch machine. It has a total of 23 stitches: 15 overlock stitches, 3 cover stitches, 4 combo stitches and 1 chain stitch, overlock stitches with a stitch width of up to 7 mm, cover stitches with stitch widths of 2.8 or 5.6 mm and combo stitches with a stitch width of up to 10 mm. Colour-coded thread paths make threading easier and in the needle area, a manual threader helps to threading the needles. The lower looper and chain looper have a mechanical threader. The knife is operated from below, which not only ensures a cleanly cut edge, but also safe handling, and it can be adjusted comfortably with one hand. The bright LED light provides a well-lit sewing and threading area. The Bernette Funlock 48 has a sewing speed of up to 1300 stitches per minute.

Features

• 2, 3, 4 and 5 Thread seams
• 3-7mm wide overlock stitches
• 2.8/5.6mm wide cover stitches
• Wide combo stitches up to 10mm
• Wide rolled hem stitches up to 1.5mm
• 87mm sewing space to the right of the needle
• LED Lighting
• 1300 spm maximum speed (stitches per minute)
• Differential feed can be adjusted while sewing – 2 feed dogs move at different times to ensure smooth seams and reduced bunching of fabric (can also purposely create ruffles for a decorative look)
• Colour coded threading
• Manual needle threader
• Accessory storage in looper cover
• Included waste collector
• Lower looper threading mechanism – Easy and Quick to thread lower looper
• Wide range of stitches from; safety seams, overlock, Coverstitch for stretchy/elastic fabrics, flat seams, roll seams, roll hems or chain stitch.

Included Accessories

• Standard presser foot
• Cover/Chainstitch inserter
• Screwdriver (Large)
• Oiler
• Foot control
• Spool Net and Spool Caps (x 4 each)
• Spare upper knife (stationary)
• Brush
• Needle set
• Needle threader/inserter
• Waste collector
• Allen screwdriver (small)
• Tweezers
• Upper looper converter (ULC) – Enables 2 thread
• Spool stabilisers (x 5)
• Dust cover

Optional Accessories

• Elasticator Foot
• Piping Foot
• Gathering Foot
• Standard Presser Foot with Clear Sole
• Ribbon & Couching Foot
• Belt Loop Foot
• Binder Attachment for Unfolded Bias Tape Foot
• Hemmer Foot
• Beading & Sequin Foot
• Cording Foot
• Hemmer & Lace Foot
• Lace Foot
• Carry Case
• Presser Foot Set (B44, B48, B64)