AT2000D Professional Air Thread Overlocker


SKU: Janome AT 2000D

The AT2000D is an air thread overlocker, all you need to do is insert the thread into new specially designed ports and the thread is transported where it needs to go just by pulling a lever.

  • It has an 8 piece feed dog system which allows the fabric to be easily fed through.
  • Includes a built in 1 step converter to allow you to change from a 3 thread to a 2 thread. All you need to do is flip the converter into position and you’re able to do a rolled hem or reduce the bulk in the overlock edge.
  • Built in needle threader (both left and right needle)
  • INTEGRATED ADJUSTABLE DIALS; These control stitch length adjustment (between 1.0 – 5.0 mm) and the differential feed dial prevents fabrics puckering and allows you to adjust the stretch of the stitching (0.5 – 2.0 mm)
  • FINE ADJUSTMENT; Easier to adjust the cutting width and you can access the upper knife release knob and switch to rolled hemming by sliding the stitch finger lever.
  • The main shaft has been redesigned to allow for greater stability, strength and speed.
  • Larger bed size for bigger projects (4.65″ wide in front of needle, 5.59″ wide behind needle, and the bed is 9.67″ deep)
  • Also has adjustable foot pressure.


  • 2, 3, 4 Thread Overlock
  • Easy rolled hem conversion (no plate change)
  • 5 mm stitch length
  • Adjustable foot pressure (5 Levels)
  • 1300 spm maximum speed
  • Adjustable cutting width
  • Built in spreader
  • Cutting width (left needle) 5.5mm – 7.5 mm
  • Lay in tension dials
  • Cutting width (right needle) 3.3mm – 5.3mm
  • LED Lighting
  • Colour coded threading guide
  • Built in needle threader
  • Differential feed ratio 0.5-2.0
  • Retractable upper knife
  • 8 piece feed dog
  • Lower looper pre-tension setting
  • Lower looper (one push air blast system)
  • Upper looper (one push air blast system)
  • Rolled hem 2.0
  • Snap on presser feet
  • Soft dust cover
  • Ball point needles
  • Origin: Taiwan
  • 7.9 kg approx machine weight

Included accessories

  • Accessory box
  • Looper threading wire (long)
  • Needle holder/spreader pin
  • Oil
  • Screwdriver (L,S)
  • Double ended spanner
  • Spool caps x 4
  • Spool holders x 4
  • Spool nets x 4
  • Small lint brush
  • Tweezers
  • Upper knife
  • Waste box
  • Foot control
  • Instructional DVD
  • Dust cover
  • Instruction Manual
  • Ball point needles


There are no reviews yet.

Be the first to review “AT2000D Professional Air Thread Overlocker”

Your email address will not be published. Required fields are marked *

Customers who bought this, also loved